Why 30,000 Drivers Trust This Solution
Delivering quality and consistency that customers rely on.
Subtotal: $89.95
Fitment check
Select your make, model and year — we'll check it against our full compatibility list instantly.
Don't see your vehicle? Message us — and you're always covered by our returns policy.
Keep your V8 on all of its cylinders. This plug-and-play module turns off AFM and DFM cylinder deactivation, so the engine stops switching between V8 and V4 mode on every drive.
Question 1: What about my vehicle's factory warranty?
Answer 1: No. Unlike an ECU flash or tune, it does not rewrite your vehicle software, and you can unplug it anytime to go back to factory settings. Warranty coverage is decided by your vehicle manufacturer and dealer, not by FullForce, so if you have questions about your coverage, check with your dealer before installing.
Question 2: Do I need any special tools or mechanical skills to install it?
Answer 2: Not at all. We designed this for a true 'plug-and-forget' experience. It plugs directly into your vehicle's OBD-II port—usually found under the dashboard—in about 2 seconds. No tools, no wiring, and no complex setup are required to reclaim your full V8 power.
Question 3: How does this help with AFM lifter wear?
Answer 3: Factory fuel management systems cause mechanical stress and excessive oil consumption during the constant transition between cylinder modes. By keeping all cylinders active, FullForce stops that switching cycle and the V4 shudder that comes with it. It cannot repair an engine that is already damaged.
We offer Free Express Shipping on all orders! Please allow 1-2 Business Days for us to process and ship your order. Estimated Arrival Time: 3-5 business days.

How it compares
An AFM lifter repair can run $3,000 to $8,500. FullForce is a simple, low cost way to stop the switching on an engine that is still healthy.
Stop the AFM switching that works your lifters on every drive. This simple plug keeps your V8 on all of its cylinders, with no tune and no permanent changes.
GM's Active and Dynamic Fuel Management constantly cycles your engine between V8 and V4 mode. Every cycle stresses your lifters — until they fail.
Lifter Failure
The constant switching between V8 and V4 mode wears down your lifters prematurely. GM's own service bulletins acknowledge the failure pattern — it is not a matter of if, but when.
Engine Shudder
Feel that rough vibration around 40 to 50 mph when your truck drops into 4-cylinder mode? That shudder is not normal driving — it is your engine under stress every single time it cycles down.
$3,000 to $8,500 Engine Repair
When lifters fail, you are looking at a full engine teardown — 12 to 14 hours of labor before parts. Truck owners can pay thousands. Regular maintenance does not stop AFM from switching.
$89.95
FullForce, for a fraction of what a lifter repair costs
Delivering quality and consistency that customers rely on.
Stopped the V4 Mode Shudder
Turned off AFM cylinder switching without tools or tuning.
Reclaimed Full V8 Power
Experienced immediate smooth acceleration and eliminated the hesitation caused by factory cylinder deactivation.
Kept the Factory Software Untouched
Used a reversible plug that unplugs anytime to go back to factory settings.
Stop the V4 mode shudder with a plug-and-play module that keeps your V8 firing on all cylinders, without permanent modifications or tuning.
|
FullForce™
|
Others
|
|
|---|---|---|
|
Fully Reversible
|
|
|
|
Quick Installation
|
|
|
|
No Battery Drain
|
|
|
|
No ECU Reprogramming
|
|
|
|
Stops Lifter Wear
|
|
|
Reclaim Your V8's Full Power
First Benefit
Stop AFM Switching
Stop the AFM switching on every drive.
Second Benefit
Smooth Performance
Eliminate hesitation with consistent V8 power delivery.
Third Benefit
Fully Reversible
Unplugs anytime to go back to factory settings.
No. This device works without rewriting the factory software, and you can unplug it anytime to return the truck to factory settings. Warranty coverage is decided by your vehicle manufacturer and dealer, not by FullForce, so if you have questions about your coverage, check with your dealer before installing.
You don’t need a mechanic or a toolbox for this. It’s a true plug-and-play solution that connects directly to your onboard diagnostic port in seconds. Once it’s in, it starts working immediately to keep your engine in full-power mode without any complex programming or permanent modifications.
We have engineered this module with advanced power management to prevent battery depletion. It only draws power when the engine is active and enters a low-power sleep mode when the vehicle is off. It is designed to stay plugged in during normal daily use. If the truck will sit for weeks, unplug it.
By keeping all cylinders active, FullForce stops the constant AFM switching that works the lifters on every drive. It cannot repair an engine that is already damaged, so if yours is ticking, have it checked first. AFM lifter repairs commonly run $3,000 to $8,500.